How to Clean Marble Surfaces So They Shine, Always

Marble surfaces are a luxurious addition to any home, but they require special care and attention when it comes to cleaning. If you have marble countertops or floors, it’s important to know how to clean them properly to keep them looking their best. In this blog post, we’ll go over some common mistakes people make when cleaning marble surfaces, and provide you with step-by-step instructions for cleaning and maintaining your marble so it shines, always.

How to Clean Marble Surfaces

Cleaning marble surfaces may seem daunting, but it’s actually quite simple with the right tools and techniques. Here are some step-by-step instructions for cleaning your marble surfaces:

Wipe up spills immediately: The longer a spill sits on the marble surface, the more likely it is to leave a stain. Use a soft cloth to blot up spills as soon as they happen.

Use a pH-neutral cleaner: Avoid using harsh, acidic cleaners that can damage the marble surface. Instead, use a cleaner specifically designed for marble surfaces, or create your own cleaning solution by mixing warm water with a few drops of dish soap or a mild detergent.

Test a small area first: Before you clean the entire surface, test your cleaning solution on a small, inconspicuous area to make sure it doesn’t damage or discolor the marble.

Apply the cleaner: Apply the cleaning solution to the marble surface using a soft cloth or sponge. Avoid using abrasive scrubbers or brushes, which can scratch the surface.

Rinse with water: Once you’ve cleaned the surface, rinse it thoroughly with clean water to remove any remaining cleaner.

Buff the surface: Use a soft cloth to buff the surface and remove any streaks or water spots. This will help bring out the shine in the marble.

Apply a sealer (optional): To help protect your marble surface from future stains and damage, consider applying a marble sealer. Follow the manufacturer’s instructions carefully when applying the sealer.

Common Marble Cleaning Mistakes

Cleaning marble surfaces requires special care to avoid causing any damage to the surface or losing its shine. Unfortunately, many people make common mistakes when cleaning marble surfaces, which can cause damage to the material.

Here are some of the most common mistakes to avoid:

Using Abrasive Cleaners – Marble is a soft stone and can easily be scratched by abrasive cleaners or scrubbing pads. Using a scouring pad or steel wool can cause permanent damage to the surface. Avoid using any cleaners that contain harsh chemicals or abrasives.

Using Acidic Cleaners – Marble is a natural stone and is sensitive to acidic cleaners such as vinegar, lemon juice, and other household cleaners. These acidic substances can etch the surface of the marble, causing it to lose its shine and become dull.

Not Wiping Up Spills Immediately – Marble surfaces are porous and can stain easily. If liquids such as wine or coffee are left on the surface for too long, they can penetrate the surface, causing unsightly stains. It is important to wipe up spills immediately to prevent staining.

Using Colored Cloths or Sponges – When cleaning marble, it is important to use white or neutral-colored cloths or sponges. Colored cloths or sponges can transfer their dye onto the marble, causing permanent stains.

By avoiding these common mistakes, you can help to maintain the shine and appearance of your marble surfaces.

Cleaning Tough Stains on Marble

If your marble surface has a tough stain, there are specific steps you can take to remove it safely and effectively. For oil stains, you can use a mixture of baking soda and water to create a paste, apply it to the stain, and let it sit for several hours before rinsing it off. For ink stains, you can use a mixture of hydrogen peroxide and ammonia to create a cleaning solution, apply it to the stain, and let it sit for several minutes before rinsing it off. For rust stains, you can use a mixture of lemon juice and salt to create a paste, apply it to the stain, and let it sit for several hours before rinsing it off.

Oil Stains – To remove oil stains, mix baking soda and water to create a thick paste. Apply the paste to the stain and let it sit for a few hours. Once the paste has dried, gently wipe it away with a soft cloth and rinse the surface with warm water.

Ink Stains – To remove ink stains, mix a few drops of ammonia with warm water. Apply the solution to the stain and let it sit for a few minutes. Gently scrub the stain with a soft cloth or sponge and rinse the surface with warm water.

Maintaining the Shine on Marble Surfaces

Also to cleaning your marble surfaces regularly, there are several things you can do to maintain their shine. First, be sure to use coasters for drinks and avoid placing hot objects directly on the surface. Second, consider using a sealer designed for the marble to protect the surface from stains and damage. Third, avoid using abrasive or acidic cleaners, as these can damage the surface and cause it to lose its shine. Finally, be sure to buff the surface with a dry cloth after cleaning to maintain its shine.

Our Take

Marble surfaces can add a touch of elegance and luxury to any home, but they require special care and attention when it comes to cleaning. By avoiding common cleaning mistakes and using the right techniques and products, you can keep your marble looking shiny and new for years to come. Remember to wipe up spills immediately, use a pH

By following these steps, there are also some tips you can follow to maintain the shine on your marble surface:

Avoid placing hot objects directly on the surface, as this can cause them to crack or discolor.

Use coasters or placemats under glasses, plates, and other items to prevent scratches and stains.

Clean up spills immediately to prevent them from staining the surface.

Dust the surface regularly with a soft, dry cloth to prevent dirt and debris from accumulating.

By following these steps and tips, you can keep your marble surfaces looking shiny and new for years to come.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top