How to Clean Marble Floors: Top 7 Maintenance Tips!

Discover 7 essential tips for marble floor cleaning and maintenance. Keep your marble floors gleaming with expert care advice.

Have you considered how to keep your marble flooring gleaming? If so, there are others; dirty marble floors immediately detract from the elegance of this flooring option. The glossy exterior has lost its lustre, and the veining design has become filthy. It will ruin Your sense of royalty is ruined.

Cleaning Marble is more complex than cleaning other types of floors. Marble requires a little extra care to maintain its lustrous beauty because it is highly porous, making it vulnerable to damage if you are not careful.

If you have one, here’s how to keep your marble floor looking good for a long time. Learn about marble care and maintenance by using this guide. This blog will go over 7 essential marble floor maintenance tips.


Let us begin!

What You’ll Need For a Clean Marble Floor

  • Bucket
  • Dust mop (preferably microfiber)
  • Soft cloths/microfiber towels
  • Wet mop
  • pH-neutral soap
  • Etch remover
  • Stone cleaner
  • 12% hydrogen peroxide
  • Ammonia
  • Marble polish
  • Sealer
  • Steel wool
  • Gloves

How to Clean Marble Floor – 7 Maintenance Tips

Maintain your marble flooring using these 7 tips, or contact us for more details.

Clean with Soap

Maintaining the pristine appearance of marble floors requires the right tools and methods. One effective way to consider this is to clean your Marble with soap. However, more than soap will do the job.

Due to Marble’s delicate nature, it requires specific, pH-neutral soaps for effective cleaning. Acidic cleaners may etch your marble surface, leaving unsightly marks similar to water stains.

To initiate the cleaning process:

  1. Combine water with a few drops of your chosen neutral soap in a bucket.
  2. Let the mopping commence.
  3. Diligently swap the dirty water for a fresh cleaning solution as required, ensuring you’re not spreading grime back onto your marble surface.
  4. Remember, restraint is vital.

Oversoaking your mop can lead to residual standing water on the floor, which, when evaporated, can cause unsightly watermarks.

Therefore, always aim for a damp mop, not a soaking wet one. This way, you’re preserving the integrity and longevity of your marble floors while maintaining their elegance and shine for generations to come. Cleaning marble floors with soap is a practical, simple, and pocket-friendly option that delivers spectacular results.


Remove Etch Marks

Etch marks, formed by acids eating away at your marble floor, can be problematic. You can address minor etching by dampening the affected area with water, then buffing marble polishing powder in a circular motion until the mark disappears.

However, larger and more severe etch marks warrant professional intervention to restore the marble floor to its smooth, polished state. Proper intervention is crucial to ensuring the longevity and elegance of your marble floor.

Clean with a Dry Mop

Maintaining the lustrous appeal of your marble floor requires regular upkeep with a dry mop. This tool, preferably featuring natural, non-chemical bristles, softly brushes away abrasive residue such as dirt and sand, helping keep unsightly scratches at bay.

You must sidestep the use of a vacuum cleaner in this preliminary stage; the wheels can become inadvertent culprits behind floor scratches. The key is gentleness. Handle your Marble with the delicateness it deserves to uphold its magnificent shine.


Rinse and Dry

Ensuring no soap residue lingers, thoroughly rinse using clean water. Mop across the entire floor, meticulously capturing every corner. After rinsing, use a dry mop or a soft cloth to dry the floor. This attention to detail guarantees a gleaming, residue-free surface.

Quick Tip: Wrap a clean towel around a floor squeegee to easily wipe large areas. It will also save your back and knees from having to bend.

Remove Stains

Marble, being porous, is quite prone to stains. If you accidentally spill something, immediate blotting and cleaning are crucial. But if the stain has lingered, don’t fret. You can still effectively restore its beauty.

Diligently spot clean using a 12% hydrogen peroxide solution enriched with a few drops of ammonia for effective stain removal. Maintaining the elegance of your Marble is still well within your reach.


Apply a sealant every two to three years to protect your marble floor from stubborn stains and retain its shine. This won’t guarantee a stain-free floor, but it significantly enhances resistance to major stains, prolonging your Marble’s gleaming beauty.

Tips for Maintaining Marble Floor and Avoiding Damage

Marble floors are a luxury. It’s, therefore, essential to preserve the sensitive surface. Here are a few ways to avoid substantial damage:

●      Clean Spills as They Happen

With its beauty and elegance, Marble is also highly absorbent due to its porous nature. Any standing water or spills have a high likelihood of causing stains or discoloration on the Marble.

The most effective strategy is to clean up spills immediately as they occur. To minimize spreading, use a damp microfiber cloth to blot the spill, beginning at the edges and moving towards the centre.

  • Prompt cleaning: Actively clean spills as they occur to prevent stain soak-in.
  • Use absorbent materials: Utilize a damp microfiber cloth, which provides optimal absorption.
  • Comprehensive cleaning: Start from the spill’s edges, moving inward, to prevent liquid from spreading.

Never Allow the Floor to Air Dry

Never leave your marble floors to air dry. This act could be disastrous as Marble has a high absorption rate for water and cleaning agents, causing unsightly discolorations or stains.

Avoid excessive water usage during cleaning. Instead, use a thoroughly wrung-out mop.

Always promptly dry the floor post-cleaning with a clean cloth or towel.

Extra rinse and dry cycles add steps to cleaning, but they’re critical to maintaining your Marble’s pristine appearance.

Go for Mild Detergents

Choose mild pH-neutral detergents to maintain the pristine condition of your marble floors. Unlike acidic or alkaline cleaners, these gentle products won’t harm the Marble’s surface, though they may not be as effective on stubborn stains.

Additionally, avoid using vinegar, citrus cleaners, ammonia, or ceramic floor cleaners, as their acidity can damage Marble.

  • Opt for pH-neutral detergents to clean marble floors safely.
  • Refrain from using vinegar or citrus-based cleaners, known for their harmful acidity.
  • Keep away from ammonia and ceramic floor cleaners as they can cause damage to the marble surface.

Felt Removes Scuff Marks

Scuff marks on your marble floors can be unsightly and troublesome. Caused by dragging furniture or wear from shoes, these marks may resist regular mopping. A felt pad or tennis ball, teamed with mild detergent and water, can erase them effectively.

  • Use a felt pad or tennis ball for stubborn scuff marks.
  • Apply a mixture of mild detergent and water to the area.
  • Gently rub the area along the grain of the marble floor.

Take Note: Avoid rubbing in circular motions, as this can damage the marble floors.

Use a Marble Sealer

Preserving your marble floors has never been easier with sealers like Black Diamond’s spray. It’s DIY-friendly and provides essential protection against spills and grease. Here’s a simplified process.

  • Generously apply the sealer and let it infiltrate the Marble’s natural pores.
  • After the advised duration, wipe or clean off any surplus.
  • Depending on the sealer, reapplying might be needed every three to five years.

Sweep regularly Mop – Occassionaly

Maintaining the stunning shine of your marble floors demands consistent care to prevent dust dullness and scratch damage. Regular sweeping with a soft broom or vacuum offers protection against such filth.

  • Consistent sweeping with a soft broom guards against marble dullness.
  • Use light vacuuming to manage dust and debris.
  • Limit mopping for marble floors; reserve deep clean sessions once a month.

Use Baking Soda with Caution

When dealing with obstinate stains, baking soda can be utilized cautiously. It should be used sparingly and not scrubbed in as an alkaline and mild-abrasive cleaner. Here are key things to remember:

  • Only sprinkle a small amount on the stain and gently rub it with a damp cloth.
  • Rinse thoroughly with cold water and dry with a soft towel.
  • Keep the application time minimal to avoid dulling the Marble’s glossy finish.

Take care not to overuse or leave baking soda on your floors for prolonged periods.

FAQs for How to Clean Marble Floor

How can I maintain a shiny marble floor?

Avoid using abrasive or acidic cleaners on marble floors because they dull the finish. Instead, restore the surface’s shine by regularly cleaning it with a pH-neutral cleaner and using a marble-specific polish.

How do you remove blackness from Marble?

Black soot and fireplace buildup have similar dark, penetrating effects. Still, they can usually be removed with just soap and water cleaning, a gentle baking soda scrub followed by cloth rinsing, or wet paste treatments that are left on for an overnight period before being rinsed and repeated.

Can You clean marble floors naturally?

Avoid vinegar and baking soda to clean marble floors naturally due to their acidic/alkaline properties. Instead, opt for hot water and pH-neutral or eco-friendly cleaners. Use baking soda sparingly on stubborn stains, ensuring minimal contact time and thorough rinsing. Always apply a gentle touch.

Clean-Up Words!

The beauty of marble floors can withstand time with proper care and maintenance. These 7 essential tips are your key to ensuring that your marble surfaces remain as stunning as the day they were installed.

From using suitable cleaning agents to addressing stains and scuff marks with care, these practices will help you preserve the timeless elegance of your marble floors. So, take these steps to heart and enjoy the enduring splendour of your marble floors for years to come, showcasing their grandeur with pride. Disclaimer: The products mentioned here are for reference only and has no association with them.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top